why front-load washers grow mould, and the routine that stops it. the detergent drawer is the culprit nobody checks — pull it after cycles so it can actually dry. her honest take: old stains may never lift; the goal is stopping the growth 🧺 🎥 RenDuH (YouTube)
Stop Mould in a Front-Load Washing Machine
A practical walkthrough of where mould hides in a front-loader — the detergent drawer, its housing, and the door gasket — and the honest truth: set-in stains may not come off, so the real goal is stopping new growth.
Steps
- 1
Take the detergent drawer completely out after use — left in place, it never dries, and that damp is where mould starts.
- 2
Scrub the drawer housing with whatever brush fits the space.
- 3
Clean with distilled white vinegar — fine for the drawer and housing, but don't leave it sitting directly on the rubber gasket.
- 4
Wipe down the door gasket and drum, and leave the door open between washes so everything dries.
- 5
Accept that set-in stains may not lift — the important thing is stopping the growth, not chasing a factory-new look.